
Model: XF-A3004
This is a professional recording microphone that does not require a sound card, with lighting/USB-C interface, and is plug and play,supports both omnidirectional and cardioid directional polar modes, suitable for various live streaming scenarios.
General | |||
Dimension(L*W*H mm) | TX:18*12*48 | RX: 14*8*48 | Box: 56.5*29*73.5 |
Weight | TX:8.7g | RX: 5g | Box: 52.3g |
Product Weight | 66g | ||
Enclosure | ABS+PC , Black | ||
Radio Frequency | 2.4GHz , sampling rate 32K | ||
Transmission Distance | 50M distance range, 100M line-of-sight | ||
Transmission Latency | 25ms | ||
Storage Temperature | -20°C ~ +45°C | ||
OperatingTemperature | 0°C ~ +40°C | ||
Operating Humanity | 10 to 85±3% | ||
ESD Protection | Air discharge: ±8kV Contact discharge: ±4kV | ||
Warranty | 12 Months | ||
Technical Characteristics | |||
Microphone |
MIC | Omnidirectional MEMS Mic | |
Frequency response | 20Hz-20KHz | ||
Sensitivity | -26 dBFS | ||
Signal to Noise Ratio | 64 dB(A) | ||
Charging | 80min | ||
Working time | 6.5H | ||
Button | Reset hole | ||
LED | 1*Green LED | ||
Battery | 70mAh, 3.7V | ||
USB IN | 5V , ≤60mA | ||
Start-up current | 9mA-11mA | ||
Current (searching) | 11-12.5mA | ||
Charging current | 70mA | ||
Working current | 13mA~15mA | ||
ShutDown Current | 9uA | ||
Receiver |
Input Voltage | DC4.8~5.4v | |
Start-up Current | 23mA | ||
Current (searching) | 21mA-22mA | ||
Working current | 23mA-24mA | ||
Consumption | ≤0.4W | ||
Battery | N/A, power by host device | ||
Button | Reset hole | ||
LED | 1*Green LED | ||
Charging Case |
Battery | 450mAh, 4.2V | |
USB IN | DC4.8~5.4V, ≤380mA | ||
Charging | 90min wiht type-C,can charge for TX 5 times | ||
Output Voltage | DC4.8~5.4V | ||
LED | 1*Green LED |
General | |||
Dimension(L*W*H mm) | TX:18*12*48 | RX: 14*8*48 | Box: 56.5*29*73.5 |
Weight | TX:8.7g | RX: 5g | Box: 52.3g |
Product Weight | 66g | ||
Enclosure | ABS+PC , Black | ||
Radio Frequency | 2.4GHz , sampling rate 32K | ||
Transmission Distance | 50M distance range, 100M line-of-sight | ||
Transmission Latency | 25ms | ||
Storage Temperature | -20°C ~ +45°C | ||
OperatingTemperature | 0°C ~ +40°C | ||
Operating Humanity | 10 to 85±3% | ||
ESD Protection | Air discharge: ±8kV Contact discharge: ±4kV | ||
Warranty | 12 Months | ||
Technical Characteristics | |||
Microphone |
MIC | Omnidirectional MEMS Mic | |
Frequency response | 20Hz-20KHz | ||
Sensitivity | -26 dBFS | ||
Signal to Noise Ratio | 64 dB(A) | ||
Charging | 80min | ||
Working time | 6.5H | ||
Button | Reset hole | ||
LED | 1*Green LED | ||
Battery | 70mAh, 3.7V | ||
USB IN | 5V , ≤60mA | ||
Start-up current | 9mA-11mA | ||
Current (searching) | 11-12.5mA | ||
Charging current | 70mA | ||
Working current | 13mA~15mA | ||
ShutDown Current | 9uA | ||
Receiver |
Input Voltage | DC4.8~5.4v | |
Start-up Current | 23mA | ||
Current (searching) | 21mA-22mA | ||
Working current | 23mA-24mA | ||
Consumption | ≤0.4W | ||
Battery | N/A, power by host device | ||
Button | Reset hole | ||
LED | 1*Green LED | ||
Charging Case |
Battery | 450mAh, 4.2V | |
USB IN | DC4.8~5.4V, ≤380mA | ||
Charging | 90min wiht type-C,can charge for TX 5 times | ||
Output Voltage | DC4.8~5.4V | ||
LED | 1*Green LED |